10
Making telephone calls
Making telephone calls
Normally, you initiate a telephone call by picking up the handset. This is
described in the following paragraphs. As an alternative, you can also initiate
a telephone call by pressing the loudspeaker key. In this case, the telephone
automatically activates the hands-free operation. This option is not described
further in the following paragraphs.
Manual dialling
Pick-up the handset, wait for dialling tone.
Dial telephone number, ringing tone or busy tone.
Start conversation when target subscriber answers the
call.
Replace the handset.
Remark:
When an incoming call is indicated by the ringing signal, you can answer it
by either picking up the handset or pressing the loudspeaker key.
Incoming calls are also indicated optically (if no telephone number is trans-
ferred):
Call
Dialling with off-line call preparation
You can also use the off-line call preparation when making telephone calls.
Just dial the telephone number of the target subscriber, check the number in
the display and seize the line afterwards.
To Next Page
Loading...
