Hold conversation as soon as the subscriber answers the
call.
Remark:
Each newly dialled telephone number will overwrite the earlier made entry
for redialling.
Automatic redialling
If the called target subscriber number is busy, the dialling process for the
telephone number dialled last can be repeated automatically up to 10 times.
Start automatic redialling:
You have dialled a telephone number and the target subscriber is busy:
Press the P key.
Press the redial key.
Auto
Replace the handset.
The telephone initiates a pause of up to one minute and then repeats the
dialling process up to 10 times (depends on the individual settings). As soon
as the called subscriber answers the call:
Pick-up the handset,
Hold conversation.
Stop automatic redialling:
In the idle state, press any key. The automatic redialling process is stopped.
To Next Page
Loading...
