4
Safety information
Safety information
Please follow the safety information in the programming instructions on page 5.
Intended use
This telephone is suited to be connected to analogue line interfaces of public
switched telephone networks.
DANGER
- Never try to unscrew the screws and open the device. You
could get in contact with current-carrying parts.
- Never touch the connector contacts with pointed or metallic
objects.
WARNING
The telephone was produced for standard use conditions.
Please do not install the device
- close to heat sources (air-conditioning, heater, exposure to
direct sunlight),
- in humid rooms (no exposure to splashing water or chemi-
cals),
- nearby devices emitting strong magnetic elds (electrical
appliances, uorescent tubes, computers, TV sets),
- in dusty rooms,
- in rooms where the device is exposed to vibrations or extre-
me variations in temperature.
CAUTION
- Never carry the telephone at the handset or the connection
cables.
To Next Page
Loading...
