INSTALLATION MANUAL
MODEL : TIS-4PL-E66D
NETWORK 4 ZONE AMPLIFIER
7
www.tiscontrol.com
TIS CONTROL LIMITED
Wanchai, Hong Kong
TIS CONTROL PTY LIMITED
SA, AUSTRALIA
Copyright © 2023 TIS, All Rights Reserved
TIS Logo is registered trademark of TIS CONTROL.
All of the specification are subject to change without notice.
MOUNTING
The size is standard 2U, so it ts easily into an equipment rack. If you want to mount the TIS-4PL-
E66D on a standard EIA equipment rack, use the included rack mounting brackets on each side.
Align the rack mounting brackets with the screw holes on the side, then tighten the screws.
To Next Page
Loading...