Titan Controls 8 Light Controller User Manual

2
Warnings & Cautions
• Read all instructions before operating!
• Do not put your controller in an area where it can get wet or sprayed.
• When using “bug bombs,” controller should be completely covered to avoid corrosion.
• There are no serviceable parts in the controller. Do not attempt to repair the unit.
• Do not put paperclips, tools, etc. into unit. Possible electrocution may occur.
• Make sure to verify your power source prior to wiring controller into power source.
• Check that all equipment that will be activated by this controller is 240 Volts.
• This controller is designed for “Indoor Use” only.
• Avoid placing the controller near heat sources.
• Do not use when operating controller in extremely humid environments.
• Do not use controller for purposes other than the intended function.
• This controller is designed for use with MAGNETIC OR ELECTRONIC BALLASTS.
• Mount your controller securely to the wall using hardware provided.
• Use controller within dened environmental specications.
• Ask your Dealer for tips and techniques regarding the use of this controller.
• Be conscientious when disposing of any products.
8 Light Controller – With Light Timer
Overview
The Spartan 8 Light Controller is designed to operate a lighting system. The controller is
built with a heavy duty relay and powder coated steel enclosure to control your ballasts.
The controller should be installed by a certied electrical professional.
8 Light Controller
This manual covers the following:
• Warnings & Cautions
• 8 Light Controller Overview
• Instructions for Operation
• Controller Specications
• Troubleshooting Tips
• Application Diagram
• Service and Repair Program
• Warranty Information

Titan Controls 8 Light Controller Specifications

General

Brand	Titan Controls
Model	8 Light Controller
Category	Controller
Language	English