Titan Dynamics
Titan Dynamics Webpage
Visit our Facebook page
Join our Discord server
Page 13 of 28
• 5.8ghz / 1.2ghz video / DJI / Walksnail / HDZero or an underslung gimbal such as the
SIYI A8
• Matek F405-VTOL flight controller (mounts directly)
• Matek M10-5883 GPS/Compass or similar
• Tmotor 55A 4in1 ESC or 3 Lumenier 51A BLHeli_32 ESCs
• (4) Emax ES08MAII servos. 2 for ailerons, 2 for ruddervators
• Example battery for beginners: 5000mah 6S LiPo
• Example battery for max endurance: 13500mah Molicel P45B 6S3P
Misc:
• 1+ 750g rolls of Polymaker Polylite prefoamed LWPLA – It can be printed in one,
but have some extra in case of reprints
• Polycarbonate, PETG or other high-temp filament for the motor mounts
• Medium CA glue for gluing printed parts together
• 220x220x250 minimum size print bed (Ender 3)
• Control horns (this one)
• M3 threaded inserts (max 6mm height)
• M3 bolts of various sizes and locknuts
• (4) 6x3mm magnets
Tilt Servo Mounting:
To Next Page
