Titan Logix Rack Control Module User Manual

TD80™ Level Gauging and Overfill Prevention System Product Manual
Rev. 2, August 4, 2015/ TD80 Introduction Page 5
TPM 001
1 TD80 Introduction
1.1 About This Manual
This instruction manual provides information specific to the Titan Logix Corp. TD80™
(hereafter referred to as the TD80) Level Gauging and Overfill Prevention System. Other
peripheral equipment should be supplied with its own instruction manual and that manual
should be referred to for proper operation of the peripheral equipment.
It is essential that this manual be read and understood for proper installation and
operation of your new TD80™ Level Gauging and Overfill Prevention System.
THIS MANUAL INCLUDES:
Introduction Description of the key features and components of the
TD80 Level Gauging and Overfill Prevention System.
Installation Description of mounting and wiring of equipment.
Troubleshooting Description of possible problems, their probable causes,
and solutions.
Technical Reference Technical Specification Guides.
Operation Description of Operation and Alarms.
Programming Description of Programming requirements and steps.
1.2 Disclaimer
The information in this document is subject to change without notice. Titan Logix Corp.
makes no representations or warranties with respect to the contents hereof.
Only qualified personnel should install this product. Please read this manual before
installing this product and follow all applicable safety and electrical regulations as
required.

Titan Logix Rack Control Module Specifications

General

Brand	Titan Logix
Model	Rack Control Module
Category	Measuring Instruments
Language	English