To Next PageTo Next Page
Need help?Do you have a question about the Titan Logix TD80 and is the answer not in the manual?
General| Brand | Titan Logix |
|---|---|
| Model | TD80 |
| Category | Measuring Instruments |
| Language | English |
Provides an overview of the TD80 Level Gauging and Overfill Prevention System.
Details the TD80 system, its components, and functionality.
Outlines the general steps for installing the TD80 system.
Describes tests and calibration procedures after installation.
Guides on selecting optimal placement for the probe and transmitter.
Details the physical mounting procedures for system components.
Provides wiring instructions for the TD80 system and Finch Display.
Details wiring for basic alarm functions like horns and lights.
Guides on wiring for overfill prevention systems.
A step-by-step checklist for a complete TD80 installation.
Describes the TD80 transmitter, probe, and Finch display.
Details the states and displays during TD80 system operation.
Explains the different operating modes of the Finch display.
Describes the various alarms including Spill, Fill/Fall, High High, and Fail.
Describes the procedure for calibrating the TD80 system's offset.
Provides general methods for troubleshooting system issues.
Addresses specific problems and solutions for the TD80 system.
Highlights frequent installation wiring errors.
Provides detailed specifications for dual rod probes.
Provides detailed specifications for coaxial probes.
Explains the requirements and methods for programming the TD80.
Outlines the sequence of steps for programming using Birdfeeder 2.
Details connecting the TD80 for programming.
Describes transferring program data between TD80 transmitters.
A checklist to ensure all programming steps are completed.
