Titan Performance Series 450e0558067 User Manual

Performance Series 450e 13
GB
Remedy in case of faults
Type of malfunction
D. Coating material exits at the top
oftheuidsection
E. Increased pulsation at the spray
gun
F. Poor spray pattern
 G. Unitlosespower
Possible cause
 1. Upperpackingisworn.
2. Piston is worn.
1. Incorrect high-pressure hose type.
2. Tip worn or too large.
3. Pressure too high.
1. Tip is too large for the coating
material which is to be sprayed.
2. Pressure setting incorrect.
 3. Volumetoolow.
4. Coating material viscosity too high.
1. Pressure setting too low.
Measures for eliminating the malfunction
1. Remove and replace packing.
2. Remove and replace piston.
1. Only use TITAN original-high-pressure hoses in order
to ensure functionality, safety and durability.
2. Replace tip.
3. Turn pressure control knob to a lower number.
1. Replace tip.
2. Turn pressure control knob until a satisfactory
spraying pattern is achieved.
 3. Cleanorreplacealllters.
 4. Thinoutaccordingtothemanufacturer’sinstructions.
1. Turn pressure control knob clockwise to increase.

Titan Performance Series 450e0558067 Specifications

General

Brand	Titan
Model	Performance Series 450e0558067
Category	Paint Sprayer
Language	English