Getting started...
07
EN
Safety information
5) Service
a)
repair person using only identical replacement
parts. This will ensure that safety of the power tool is
maintained.
Safety instructions for planers
a) Wait for the cutter to stop before setting the tool
down. An exposed rotating cutter may engage the
surface leading to possible loss of control and serious
injury.
b) Hold the power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator an
electric shock.
c) Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the workpiece by your hand or against the body leaves
it unstable and may lead to loss of control.
d) Only bring the power tool into contact with the
workpiece when switched on. Otherwise there
is danger of kickback if the cutting tool jams in the
workpiece.
e) Do not allow the roller and blades to come into
contact with your hands. Contact with these
rotating parts will cause serious injury.
f) Never plane over metal objects, nails or screws.
Blades and roller will be damaged and cause
increased vibration and a hazard to the user.
g) While working, always hold the planer in such a
workpiece. Otherwise the planer could slip and cause
injury.
TTB876PLN by TITAN
To Next Page
Loading...
Need help?
General
