Need help?Do you have a question about the Titan TTB579PLN and is the answer not in the manual?
Diagram and identification of all numbered parts of the jointer planer.
Electrical input, speed, width, depth, height, feed speed, table size, and weight details.
Details on sound pressure, sound power, and declared vibration emission values.
Guidance on managing hand-arm vibration syndrome risks during operation.
Key points on plug removal, voltage checks, and accessory use.
Risks associated with silica, wood, and gypsum dusts, and methods to reduce exposure.
Explanation of common symbols and abbreviations found on the product and manual.
Fundamental safety precautions for operating electric tools.
Guidelines for maintaining a clear, safe, and well-lit work area.
Recommendations for appropriate clothing, eye protection, and dust masks.
Instructions for maintaining tools, disconnecting power, and checking cords.
Procedures for checking damaged parts, ensuring proper function, and qualified repairs.
Specific advice on handling dust, including ventilation and safety equipment.
Safety rules for woodworking machines, including operator age and workpiece handling.
Safety measures specific to jointer planer use, including guards and kickback.
Ensuring correct voltage supply and safe connection to mains power.
Guidelines for feeding workpieces, avoiding kickback, and using push pads.
Instructions for checking blades, handling them safely, and avoiding heavy cuts.
Ensuring guards are fitted and faults are rectified promptly.
Importance of mounting the dust extractor for machine safety and interlock function.
Steps for unpacking, checking for damage, and verifying all parts are present.
List of supplied and not supplied items needed for setup and operation.
Instructions for attaching the rubber feet to the machine base.
Procedure for attaching and securing the guide fence to the out-feed table.
Steps for mounting and securing the blade guard assembly.
Instructions for installing the height adjusting handle on its shaft.
Details on the machine's intended purpose, limitations, and general operating warnings.
Essential checks to perform before each use for safety and performance.
Steps to adjust and lock the guide fence angle for planing operations.
Procedure for attaching the dust extraction port for safety and chip removal.
How the extraction port engages safety interlock switches for machine operation.
Adjusting the blade guard position relative to the workpiece and guide fence.
Adjusting the in-feed table to control the material removal per pass.
Steps for feeding the workpiece through the planer for a cutting pass.
Adjusting the blade guard for thicknessing operations.
Attaching the dust extraction port for thicknessing mode, engaging safety switch.
Adjusting the thicknessing bed height for desired material removal.
Rules for keeping the machine clean and ensuring safe operation.
Essential checks before operating the machine to ensure it's in good condition.
Monitoring for abnormalities and clearing chippings during operation.
Cleaning procedures after use and recommendations for storage.
Regular checks and cleaning of beds, rollers, and anti-kickback features.
Procedure for resetting and verifying the 90° and 45° positive stops on the guide fence.
Step-by-step guide to safely remove the cutter blades from the machine.
Instructions for correctly installing new cutter blades using setting blocks.
Procedures for checking, cleaning, or replacing motor brushes and safety precautions.
Detailed steps for replacing the mains plug, including wire colour coding.
Information on product repair limitations and contacting qualified specialists.
Recommendations for storing the machine safely and in optimal conditions.
Precautions to take when transporting the machine to prevent damage.
Diagnosing and resolving issues related to the machine failing to start.
Troubleshooting causes and solutions for reduced motor speed during operation.
Identifying reasons for motor shutdown during no-load or loaded operation.
Addressing issues causing an unsatisfactory finish on planed or thicknessed workpieces.
Resolving blockages in the extraction port during thicknessing or planing.
Instructions for the environmentally responsible disposal of waste electrical products.
List of directives, standards, and technical specifications the product complies with.
To Next Page
General
