Titanium 19000 - Installation and Operation; Initial Installation Setup

To Next Page

To Previous Page

4. Installation and Operation

After connecting the receiver to other required equipment, turn on the receiver,

there should be no channel information available at first. You need to follow the

procedure to setup your receiver to search the channel.

Main Menu

Press MENU button to activate main menu, main menu consists of Installation,

Service organization, Output, System, Timer, USB.

Use UP/DOWN button to select your subject and press OK to confirm your selection

and enter that sub menu, press EXIT button you can return to the previous menu

4.1 INSTALLATION

Select Installation, the picture will be displayed

like this, here you can do Dish setup, Restore

Factory Default, Software Update, Save or Load

STB data

Antenna Settings

Press OK to Enter Dish setup, here you can make Satellite Scan, Satellite Edit, TP

Search, TP Edit and other related Functions.

A: Satellite List

This window shows the pre-stored satellite list, in

this menu, you can Add, Edit, Delete, Satellites.

Add