16
www.titathink.com
5. Press”Setup Wi-Fi” to Setup Wi Connection
6. Select your Wi-Fi SSID
7. Save your settings, Press “Save“
Type the WiFi password to the eld of “Setup WiFi” popup window. And
then please tap “OK” button.(Please note: The password can be any
mixture of lower and uppercase alpha-numeric characters. Extended
characters are not permitted. Do not use a wireless password with
spaces or punctuation in it. For example, " T & T's Wi-Fi#321" may
not work unless you change it to something like "TTWIFI321")
If you type a wrong password, there will be icon on the right side of WiFi
network. That means your password is incorrect or the WiFi connection
failed! Please move the camera main unit closer to the source of WiFi
signal. Tap the WiFi network password again to recheck it.
If you type a correct password, there will be icon on the right side of WiFi
network. Thar means the WiFi password is correct.
Please note: The strength of Wi-Fi signal at the camera main unit
location should be no less than 80%. Any less than that may be
unreliable, so you may want to move your router or the camera, or
adjust the angle of your router's antennas.
Keep in mind that the wireless signal travels easily through common
building materials such as wood, glass, sheet rock, and vinyl siding, but
does not go at all through metal, if there are any big metal objects such as
fridge, lling cabinet or HVAC ducting in between the Wi-Fi router and the
camera, try to reposition either the camera or the router so that the metal
object doesn't block the signal.
Please tap “Save” to finish the adding operations. WARNING: If you
don’t tap “Save” button, you will be unable to list this camera to “My
camera” interface.
To Next Page
Loading...
Need help?
General
