TM Robot TM25S - ESD Handling Precautions; General Safety Information

Hardware Version : 5.02 Document Version : 1.0.
TECHMAN ROBOT INC. 5F., No. 58-2, Huaya 2nd Rd., Guishan Dist., Taoyuan City, 333411 , Taiwan
3
1. Handling components that are sensitive to electrostatic discharge (ESD)
To prevent ESD-sensitive components (e.g., printed circuit boards) from being
damaged, please handle the components in the following steps:
 Wear an anti-static wrist strap before replacing ESD sensitive components
and make sure the bracket is always connected to ground when replacing
components.
 Hold the protective cover for the component’s edge connect and avoid
touching any exposed part.
 Drop the replaced component into an antistatic bag
2. Safety information
DNAGER：
Identifies an imminently hazardous situation that, if not avoided, is likely to result in serious
injury, and might result in death or severe property damage.
WARNING:
Identifies a potentially hazardous situation that, if not avoided, will result in minor or
moderate injury, and might result in serious injury, death, or significant property damage.
CAUTION:
Identifies a potentially hazardous situation that, if not avoided, may result in minor injury,
moderate injury, or property damage.