Toa BG-1015 - 6 Input Connections

8
22. Mute selector switch [MUTE]
Changes the type of mute operation.
(Refer to p. 10, "Mute Function.")
23. Module selector switch [MODULE]
Selects the output terminal for the module signal.
Shift the switch to the PAGE position when using
the paging module, and to the BGM position
when using the BGM module.
24. AUX input terminals [AUX]
An internal mixing type of jack.
–10 dB, 47 kΩ, unbalanced, RCA jack.
Used to connect external equipment input
signals. (Refer to p. 8, "Input Connections.")
25. Preamplifier output terminal [PREAMP OUT]
0 dB, 600 Ω, unbalanced, RCA jack.
Used to feed output signals to external signal
processing equipment such as limiters and
equalizers.
26. Power amplifier input terminal [POWER IN]
0 dB, 10 kΩ, unbalanced, RCA jack.
Used to connect input signals from external
signal processing equipment such as limiters and
equalizers.
27. Module input port
Accepts one of 900 series plug-in modules.
For the selection of the most appropriate module,
refer to Plug-in Module Instruction manual.
28. Terminal cover
Make sure that the terminal cover is reattached
after speaker output terminal connection
completion.
6. INPUT CONNECTIONS
[MIC input connections]
[TEL and PROGRAM input connections]
[AUX input connections]
G COM HOT
Input source
H
C
E
MIC
G COM HOT
H
C
E
AUX
Input source
H
E
Input source
H
E