GENERAL PURPOSE BROADCAST REMOTE MICROPHONE
Operations and Broadcasting
from Remote Microphone
4-2-1
VM amplifier
RM-200M
EV-200SV-200M
Broadcasts from the VM amplifier can be remotely enabled by pressing the keys on the RM-200M or
RM-210 Remote Microphone. Remote control is also possible even when two or more Remote Microphones
or VM amplifiers are connected.
VM amplifier functions enabled by the Remote Microphone:
(Control and audio)
• Individual zone broadcasts
• Zone group broadcasts (should be preprogrammed at the VM amplifier)
• Simultaneous All-zone calls
• Emergency broadcasts
(Control)
• Message playback (Recorded memory card and EV-200 must be installed.)
• Emergency activation
Status indications that can be confirmed at the Remote Microphone:
• Power
• Failure
• Emergency activation
• Broadcast zone selection
• Other unit in operation
• Current unit in operation
To Next Page
Loading...
Need help?
General
