Toa VX-3004F - Indicator State at the Time of Lamp Test

2-5
Chapter 2 INDICATOR STATUS OF REMOTE MICROPHONES
1.5.IndicatorStateattheTimeofGeneral/BGMBroadcast
When a general/BGM broadcast function has been assigned to a function key, the 2 indicators to the left of the
key indicate its selection and broadcast statuses.
Note
For instructions on assigning functions to function keys, see the separate Setting Software Instructions, "EVENT
SETTINGS."
Broadcast Status Indicator
Selection indicator
Function key (General/BGM broadcast key)
The meanings of the 2 indicators next to the Function key are as follows:
Indicator Status Meaning
Selection Indicator Unlit
When the function key is not pressed
Lights green
When the unit is brought in general/BGM broadcast by
pressing the function key
Broadcast Status Indicator Unlit
When a general/BGM broadcast assigned to the function
key is not activated
Lights green
When a general/BGM broadcast assigned to the function
key is being broadcast from the equipment other than the
Remote Microphone
Lights yellow When a general/BGM broadcast assigned to the function
key is being broadcast from the primary Remote Microphone
or other Remote Microphone
1.6.IndicatorStateattheTimeofRMBroadcastStatusDisplay
The Broadcast status indicator to the left of the Function key indicates the current broadcast status of other
Remote Microphone.
Note
For instructions on assigning functions to function keys, see the separate Setting Software Instructions, "EVENT
SETTINGS."
Broadcast Status Indicator
(Always unlit, not used)
Function key (RM broadcast status display key)
The meanings of the 2 indicators next to the Function key are as follows:
Indicator Status Meaning
Broadcast Status Indicator Unlit
When the Remote Microphone assigned to the function key
is not engaged in broadcasting
Lights yellow
When the Remote Microphone assigned to the function key
is engaged in broadcasting