Toa VX-3004F - Indicator State at the Time of Intended Control Output

2-25
Chapter 2 INDICATOR STATUS OF REMOTE MICROPHONES
2.9.IndicatorStateattheTimeofFailureOutputReset
When the VX-3000 system is set to enable "Surveillance function," the failure output reset function can be
assigned to a function key.
When the failure output reset function has been assigned to the Function key, the failure status indicator can be
reset by pressing the key. The indicator to the left of the key lights only when the key is pressed.
Notes
• Forinstructionsonsettingthesurveillancefunction,seetheseparateSettingSoftwareInstructions,"BASIC
SETTINGS."
• For instructions on assigning functions to function keys, see the separate Setting Software Instructions,
"EVENT SETTINGS."
(Always unlit, not used)
Key ON/OFF Indicator
Function key (Failure Output Reset key)
The meanings of the 2 indicators next to the Function key are as follows:
Indicator Status Meaning
Key ON/OFF Indicator Unlit
When the function key is not pressed
Lights green
When the function key is pressed (as long as it is pressed)