ENGINE OPERATION46
7
Emergency engine stopping
Remove stop switch lock to stop the
engine.
1. Stop switch
2. Stop switch lock
ENOM00910-0
Spare emergency stop switch lock
A spare emergency stop switch lock is
provided in the tool bag.
When used as described, the emergency
stop switch clip and emergency stop
switch lanyard system stops the engine if
the operator falls away from the controls.
When an operator falls into water, be sure
to use emergency stop switch lock of the
spare.
Be sure to confirm the spare stop switch
lock is in the tool bag before begin to oper-
ate.
ENOM00920-0
ENOW00870-0
Sudden steering may cause passenger(s)
to be thrown overboard or falling down.
Tiller handle type
Right turn
Move the tiller handle to the left
Left turn
Move the tiller handle to the right.
Remote control type
Right turn
Turn the steering wheel to the right.
Left turn
Turn the steering wheel to the left.
To Next Page
Loading...
