Tohnichi R-CM User Manual

MODULAR CONVERSION RECEIVER
MODEL: R-CM
Operating Instruction
To use this product properly and safely, please read this
operating instruction carefully before use. If you have any
question about the product and its operations, please contact
your nearest distributor or Tohnichi Mfg. Co., Ltd.

Tohnichi R-CM Specifications

General

Brand	Tohnichi
Model	R-CM
Category	Receiver
Language	English

Summary

1 Outline

2 Specifications

3 External View and Each Part Name

3-1. Figure and Name of Parts for T-FH/T-FHM and previous transmitters

Illustrates and names the parts of the T-FH/T-FHM and previous transmitters for external view.

3-2. LCD Display

Explains the LCD display variations for different radio modules (M-FH, M-BL, M-FD) and their modes.

3-3. RS232C Connector

Details the RS232C connector pin assignments and provides a connection example for PC/PLC.

3-4. In/Output Connector and LED

Describes the pin configuration and functions of the in/output terminals and associated LEDs.

4 Precaution for Use

4-1. Power Source

Details on the power supply requirements and cautions for the R-CM unit, including voltage and adapter usage.

4-2. Usage Environment

Guidelines for optimal operating locations, avoiding interference and environmental factors.

4-3. In/Output Terminals

Instructions for wiring input/output terminals and power supply, including terminal screw torque.

5 Handling

5-1. Installation/Remove way of the Radio Module

Step-by-step guide on how to install and remove the radio module from the receiver unit.

5-2. Installation/Remove way of DIN rail

Instructions on how to attach and detach the R-CM unit to/from a DIN rail.

5-3. How to replace the backup battery

Procedure for replacing the backup battery in the R-CM unit, including preparation and steps.