Tohnichi R-CM - 3 External View and Each Part Name; 3-1. Figure and Name of Parts for T-FH;T-FHM and previous transmitters

Modular Conversion Receiver Model: R-CM
5
3
External View and Each Part Name
3-1. Figure and Name of Parts for T-FH/T-FHM and previous transmitters
Front Cover Module Fixing Lever
Status Lamp
Receive LED
In/Output Terminal Locker
Power Terminal
SET button
SELECT button
LCD
RS232C Connector Power Switch
Extension Connector
● Module xing metal xtures
It is a lever to x when the wireless module is installed.
● Front cover
Open it when installing the wireless module or wiring the input / output terminal block.
When the cover is opened, there is an instruction sticker of the terminal block number and
how to install the radio module.
Close the cover during use.
● Status lamp
The lamp is lit blue or red accordingly the status
* The operations depend on the radio module. For details, refer to the instruction manual for each
wireless module.
● RS232C connector
Used when connecting to an external device (PC / PLC, etc.).