Tokheim ProGauge MAGLINK LX - Operation

Maglink LX User Manual | Manual update
Rev. 9, 04-2016
Page 11 of 40
7 O PERATION
The application has an easy-to-use "circulate" menu, with which the user can browse through all the
available functions.
The following image shows the opening page of the console:
This page summarizes the main information relating to one or more tanks. You can view up to 4 tanks
simultaneously on the same page. If there are more than 4 tanks configured you can view the next one by
pressing the large red arrows in the left and right parts of the page.
The first line at the top of the page contains a list of tanks connected to the console: The icon colour of tank
number reflects the state of the reservoir.
The following table lists the data visible in the second row at the top of the page:
Information
Description
Red arrow on
Circular menu including: "Tanks
,”
"Tank Details
,”
"Location
,”
"ALARM LOG"
Tokheim
Station name
Tanks
Page Title
INFO
Button to access system information/functions
In the central part of the page press the red right/left arrows to display the previous and/or subsequent
data of the tanks, in the case where more than 4 tanks are connected to console (The page allows
displaying 4 tanks at a time).
The following table lists the data visible in the lower row at the bottom of the page:
Information
Description
Red arrow below
Circular menu including: "Tanks
,”
"Tank Details
,”
"Location
,”
"ALARM LOG"
050
Page Number
192.168.1.209
IP address of the console
05/11/2015 11:44:23
Current date and time (There may
be a message about the static/dynamic
leakage/loss)
2.3.3
–
2.3.0
Firmware, application and web versions
P 01/02
Tank number examined/total number of reservoirs