Maglink LX
User Manual | General description
Rev. 9, 04-2016
Page 7 of 40
4
G
ENERAL
D
ESCRIPTION
4.1
Labelling and type designation
The following table lists the labels placed on the equipment:
Labelling Description
The labelling on the outer container contains the following
data:
• Name and address of the manufacturer
• CE marking with the Notified Body
• Product Name
• The "Caution" symbol (0434B of 01/2004), according to
ISO 7000
• Serial number
• Year of production
• Power Supply(VAC and Hz)
• Power consumption (VA)
• Operating temperature (°C)
• Ingress protection (IP grade)
• Fuse rating
• Indication that inside there is intrinsically safe circuit
ATEX labelling on the outer container contains the following
data:
• Name and address of the manufacturer
• Equipment Type (BRA-SIP, or BRA-2SIP)
• ATEX Reference number of the certificate
• ATEX Marking: II (1) G [Exia] IIB FISCO power supply
UM=250 V [Exia] IIB
• Serial number
• Electrical data
4.2
Description
The console is a device for the monitoring of the level of probes and for signalling the relative tank alarms.
32 probes can be supported, 16 on-board (8 with the addition of a MagDirect ,Max 2 MagDirect), 32 DVD
(Fuel Quality Sensors, one for each tank), 4 on board relays, 6 inputs on board, and an external expansion
module that can carry up to 4 expansion cards. Each expansion card supports 8 relay outputs, 8 Digital
Inputs or 4-20mA. With a combination of these cards the system can support 32 relays and 0 inputs, 32
inputs and 0 relays, and combinations of both with modularity of 8.
The console can be interfaced with the FCC/POS on the station via either serial or Ethernet.
The console is equipped with a resistive type touch screen, so it is possible to use it with fingers (even with
gloves), special pens and likewise. It required to contact and apply a pressure to use it.
To Next Page
Loading...
