Maglink LX
User Manual | General description
Rev. 9, 04-2016
Page 8 of 40
The following table lists the principal technical characteristics of the console:
Characteristic Value
Power supply 100 ÷ 240 V~, 50÷60 Hz
Consumption 15 VA
Operating temperature (-10 ÷ +50) °C
Relative humidity (5 ÷ 95)%, non-condensing
Number of probes 32
Number of ON-OFF external sensors Up to 32
Number of ON-OFF internal sensors 6 (only with Dipswitch 2 on ON)
External relay outputs Up to 32
Internal relay outputs 4
Lower power of the relay output 0,5 A, 33 V~, or 2 A, 30 V DC
Output power for the probes
12 V DC, 100 mA per output per probe, connectors
MR3 MR4 (up to 8 probes per connector)
Serial communication of the probes RS485
Host communication (management) RS232
Printer communication and management software RS232
Integrated web server for configuration,
consultation, communication, and emails.
TCP/IP
GSM modem for SMS service 1 Optional
IFSF 1 Optional
Case Plastic
Protection IP40
Dimensions 265 x 190 x 95 mm
4.3
Compatible probes
The following table lists the probes compatible with the MAGLINK LX console:
Probe
XMT EXD 485
XMT SI 485
XMT RF (RF receiver required)
The following table lists the auxiliary equipment of the MAGLINK LX console:
Auxiliary equipment
Expansion cards, up to 32 relays and 0 inputs, up to 32 inputs and 0 relay, and various combinations in
modules of 8
Local printer
To Next Page
Loading...
