Maglink LX
User Manual | Introduction
Rev. 9, 04-2016
Page 5 of 40
3
I
NTRODUCTION
This manual has been prepared in accordance with IEC 82079-1 standards. “Preparation of instructions for
use - Structuring, content and presentation - Part 1: General principles and detailed requirements”and
according to the ATEX Directive 2014/34/EU concerning equipment and protective systems intended for
use in potentially explosive atmospheres.
The manual provides all necessary information on using a Maglink LX console.
The following table lists the symbols used in the document:
Symbol Description
ATTENTION: Important information and notes regarding operations and use
considerations
IMPORTANT: Danger to persons (including death), to property or to the
environment
The following table lists reference data of the manufacturer:
Data Description
Name Manufacturer_name
Address
Address
20813 Bovisio Masciago (MB)Address
ItaliaAddress
Telephone Tel
Fax Fax
Website www
e-Mail eMail
ATTENTION: This manual must be used in conjunction with the following manuals:
• Configuration Manual
• Installation Manual
In order to use the console as described below in this manual, you must have installed the
consoles as per Installation Manual and use the console as per the Configuration Manual
ATTENTION: This manual must be used in conjunction with safety instructions:
IMPORTANT: Console installation should be performed by qualified/trained personnel, as
shown in the Installation Manual, Configuration Manual and according to safety instructions
To Next Page
Loading...
