Maglink LX
User Manual | Power On/Power Off
Rev. 9, 04-2016
Page 9 of 40
5
I
NTENDED USE AND REASONABLY FORESEEABLE MISUSE
The intended use for the MAGLINK LX console is only for that described in this manual.
The console is used for monitoring the level of the probes installed in the tanks.
The console must be installed in a safe area and includes an Intrinsic safety barrier, 2 channels (BRA-2SIP)
that serve to connect the XMT-SI-485 probes
The following table lists the characteristics of use of the intrinsically safe barrier contained in the console:
MAGLINK LX Features (barrier) Description
Group (area of use) II (Surface industries different from mines)
Category and type of potentially explosive
atmosphere
(1) G
Protection mode ia
Group of substances (gases, vapours or mists) IIB
The specifications of use for console security and for the Barrier are provided in this manual and on the
product label.
IMPORTANT: Safety instructions constitute an attachment to this manual and users must
acknowledge it before using the equipment
IMPORTANT: The Console should not be used in areas at risk of fire and explosion. The
probes of the XMT-SI-485 family are installed in risk of fire and explosion areas and must be
connected to the Barrier contained in the console itself.
The following table lists some reasonably foreseeable incorrect uses:
Element considered Incorrect use
Resistive touch screen
Do not use for selection of options other than your
fingers and/or special accessories intended for
resistive touch screens
USB and USB Port devices
Do not use other USB devices than those formatted
as FAT 32
Do not connect the printer, PC, tablet, mobile phone
to the USB ports
Serial ports
Do not use serial ports other than for the printer
and PC with management programs that interface
with the protocols provided by Start Italiana S.r.l.
Network cable
Do not use the other network cable to connect your
PC or the corporate network
To Next Page
Loading...
