Maglink LX
User Manual | Print inventory
Rev. 9, 04-2016
Page 28 of 40
9
P
RINT INVENTORY
The console can be connected to a Sprint serial printer through the RS232 serial port. Once connected, the
user can print the current inventory .
The following table shows the necessary procedure steps for printing stock:
Step Description
1 Connect the Sprint printer to the console RS232 port using a CX cable
2 Press the "INFO" button and access the relevant page
3 Press the button "Print stock" and wait for printing
Via the console configuration you can turn on automatic printing of various events such as:
• Alarms
• Shift report
• Delivery
• Losses
• Reconciliation
Refer to the Configuration Manual.
To Next Page
Loading...
