EasyManua.ls Logo

Tokio Wireless - LED Indicator

Tokio Wireless
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remarks:
When play music on some mobile phones, the music will be transmitted to the
mobile phone’s speaker instead of Tokio Wireless. You have to select transmit
the sound via Bluetooth” in the settings menu and then choose Tokio
Wirelessas speaker device. The music will be transmitted to Tokio Wireless.
Please refer to your mobile phone’s users manual for further information.
When the volume has been adjusted to max or min, you will hear one prompt
tone.
If you want to remote control last/next song, pause/play, it needs your
Bluetooth mobile phone or Bluetooth transmitter paired with the Tokio
Wireless to support AVRCP profile, please refer to the users manual of your
mobile phone or Bluetooth transmitter for further information.
Only the paired Bluetooth devices(phone or transmitter) support fast
forward/fast rewind function, and Tokio Wireless can use this function. Please
refer to your Bluetooth devices(phone or transmitter) users manual for
further information
The Bluetooth will disconnect between Tokio Wireless and mobile phone
automatically if you plug 3.5mm audio input, and the Line in is available in
this time, but the other functions of Tokio Wireless is not available.
6. LED indicator
1) Charging
LED indicator
Status of Device
Red LED on
Charging
Blue LED on
Finish charging
2) Pairing with Bluetooth device
LED indicator
Status of Device
Red and blue LED flashes
alternately
Pairing mode
Blue LED flashes once quickly
every 2 seconds
Not connect with Bluetooth device
Blue LED flashes twice quickly
every 4 seconds
Have already connect with Bluetooth
device
Blue LED flashes slowly
continuously
Calling/incoming call
Blue LED flashes once quickly
every 2 seconds
During a call
Red LED flashes instead of blue
LED
Low battery
13