There is one piece of 18650 rechargeable battery inside the monitor.
You can open the battery cover to change battery if necessary.
The power indicator is during charging and is off after charged red
fully. Short press Power button, current battery level displays at the
left corner of monitor.
The anti-reflective hood is used to reduce the reflection of light.
Take off the lens protector and UV filter, then screw the hood on the
lens.
Detailed Operation
E-mail: support_eu@tomlov.com -8-
1.Charge the Microscope Correctly
2.Install Anti-reflective Hood.
USB
(1) Method One( )Recommended
(2) Method Two
Please charge the microscope fully
firstly for method one.
Please be free to contact us if you need any help.We have detailedvideos
to solve your problems.
1
2
To Next Page
Loading...
