TOMLOV DM201 User Manual

Method 2:Plug one end of the USB cable into the Micro SD slot on the
base, and connect the other end of the cable into the Output slot on
the monitor.
Sliding the touching bar from left to right to
adjust brightness of the main lights.
You can save pictures and videos on a Micro SD card to review later.
Insert the Micro SD card into slot on back of the monitor.
4.Save Pictures/Videos with Micro SD Card
Sliding the bottom of the monitor also can
adjust brightness.
Sliding the touching bar on the base to
adjust brightness of two gooseneck fill
lights.
Method 1:(recommended) Plug the USB cable into the Micro SD slot
on the base ,and connect the adaptor with power.
3.Connect and Adjust Fill Lights
USB
(1) Method One(Recommended)
(2) Method Two
If charged by method two,the 2 sides light are on,which can be turned
off by sliding the touching pad.
1
2
E-mail: support_eu@tomlov.com -9-

TOMLOV DM201 Specifications

General

Brand	TOMLOV
Model	DM201
Category	Microscope
Language	English