Connecting to GO/PRO and WEBFLEET
17
EN
7. Enter the licence plate number of the
vehicle.
8. Select the appropriate vehicle type.
If you select Truck or Bus, you have to enter
your vehicle dimensions.
If you have properly connected the two
devices, you will receive a welcome message
from WEBFLEET confirming the activation. In
future the connection is established
automatically.
To check the connection status between the
two devices, tap Settings in the WORK menu
on your navigation device, then tap
Connection status.
IG_EN.book Page 17 Friday, June 10, 2011 3:26 PM
To Next Page
Loading...
