Reset LINK 300/310
26
EN
Reset LINK
300/310
If the LINK 300/310 does not operate properly
or signals a system error (see Diagnostics on
page 24) you may need to reset the unit. Only
reset the LINK 300/310 after you have made
sure you have carried out all previously
described steps without success.
To reset the LINK 300/310 press the reset
button with a thin pointed object until it clicks
and keep it pressed for 5 seconds. The unit
reboots immediately after releasing the reset
button.
IG_EN.book Page 26 Friday, June 10, 2011 3:26 PM
To Next Page
Loading...
