option function
The search button allows you to search for a specific location and place your cursor there. You use it to
locate:
● an address
● one of your favourite locations
● your home location
● a recent destination
● a nearby point of interest (e.g. a hotel or petrol station)
● your current GPS position
Related topic:
To learn more about the options to search a location, see the
"Picking locations " description.
The cursor button provides functions for your cursor location (i.e. the location indicated by the blinking
icon). You can:
● calculate a route from your current location to the cursor location
● find a point of interest near the cursor location
● centre the map around the cursor location
● turn the cursor location into a favourite
Options
The options button allows you to change the items that are currently being displayed on the map:
● show the number of roads and streets
● show the number of street names
● show or hide all points of interest
● show or hide all favourites
Tap Show POIto use the Enable/disable POI preference to specify which categories of points of
interest can be displayed.
Note:
The option to show or hide all points of interest in this menu is the same as
Show POI / Hide POI
preference. Changes have direct effect on this preference.
Tap the GPS button (in the top right corner of the screen) to re-centre the map around your current
GPS position.
Done
Tap Doneto return to the main screen.
1.5. The schematic view
Instead of the main screen, a much simpler, schematic design can be used to display driving instructions. Some people prefer
the simplicity of this "at-a-glance" schematic display.
You can switch to the schematic display using the turn off map display preference.
You can also set TomTom Navigator to hide the map only when you go faster than a certain speed.
To Next Page
Loading...
