TomTom RIDER Reference Guide

9
Mounting on a motorcycle
1. Attach the RAM™ mount kit to your motorcycle.
2. Fix the holder to the mount and connect the wires to your motorcycle's wiring system.
Important: The red POS (+) contact needs to be connected to the motorcycle's wiring loom at
a point between the ignition and the +12V battery supply. The black NEG (-) wire needs to be
connected to the motorcycle's wiring loom at a point between the ignition and the -(GND)
battery supply. Attach to a 12V point that can be switched off by the ignition such as the light
circuit.
When you are attaching the mount kit to your motorcycle, follow these guidelines:
 If you are unsure about attaching the mount kit yourself, ask a professional to fit it for you.
 If you choose to attach the mount kit yourself, note that the Active Dock has a built-in fuse.
This means that you don’t need to add a fuse between the device and the motorcycle bat-
tery.
 Make sure that the mount kit does not interfere with any of the controls on the motorcycle.
 Always use the correct tools. If you use unsuitable tools, you may damage or break the
mount kit.
Using your Rider

TomTom RIDER Specifications

General

Marine (chartplotters, sounders)	No
Languages support	Multi
Map coverage	All Europe
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Native aspect ratio	4:3
Storage media type	Flash
Compatible memory cards	Not supported
Form factor	Fixed
Product color	Black
Text-to-speech message reader	-
USB 2.0 ports quantity	1
Power source type	Battery
Battery life (max)	6 h

Weight and Dimensions

Depth	53 mm
Width	130 mm
Height	101 mm
Weight	353 g