TOOLCRAFT TPS-900 - 4 Package Contents

To Next Page

To Previous Page

4. Package contents

• 4-in-1 rework station

• 1 x support holder for soldering iron (with dry cleaner/brass wool)

• 1 x support holder for desoldering gun (with dry cleaner/brass wool)

• 1 x mounting bracket for hot air nozzle

• 2 x knurled screw for mounting bracket

• 4 x nozzle attachment for hot air nozzle

• 1 x desoldering gun

• 1 x soldering iron

• 1 x soldering tweezers

• 1 x hot air nozzle

• 1 x vacuum suction lifter

• 11 x rubber suction cup (for vacuum suction lifter)

• 3 x suction tips (2 x straight, 1 x bent; for vacuum suction lifter)

• 2 x rubber ring

• 3 x desoldering tip (for desoldering gun)

• 2 x large rubber seal ring (for desoldering gun)

• 2 x O-Ring large (for desoldering gun)

• 2 x O-Ring 6 x1.5 (for vacuum connector plug for desoldering gun and vacuum suction lifter)

• 1 x cleaning wire (for desoldering gun)

• 10xlter(14.5x3mm,fordesolderinggun)

• 10xlter(18x3mm,forairlterinthedesolderinggunhose)

• 1 x replacement spring (for desoldering gun)

• 1 x small heat-resistant rubber protection mat

• 1x USB-B to USB-A cable

• 1 x mains cable

• Operating instructions

1Up-to-date operating instructions

Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR

code. Follow the instructions on the website.