TOOLCRAFT TPS-900 - Safe Operation Practices

40
• Make sure that there is enough space in the direction from which the hot air nozzle discharges hot air.
Thehotairmaycauseareifthereisnotenoughspace!
• Choose an appropriate location that will allow you to conduct the necessary soldering work.
• Nevercovertheproduct,asthismaycauseittooverheatandcatchre.Ensurethatthereissufcient
ventilation when the workstation is in use. The ventilation slots are used to draw in the air required for
operation.
• Never insert objects into the ventilation holes on the 4-in-1 rework station, as this may cause a fatal
electric shock!
• Do not place the 4-in-1 rework station on valuable furniture surfaces without using suitable protection.
Otherwiseitmaycausescratches,dents,discolourationsorheat/respots.
• The product must be installed, used and stored out of the reach of children. Children must be supervised
to ensure they do not play with the product. Burn hazard!
• Donotusetheproductintheimmediatevicinityofstrongmagnetic/electromagneticelds,transmitter
aerials or HF generators. These may affect the electronic control system.
• Make sure that the cables/hoses are not pinched or damaged by sharp edges. Do not place any objects
on the cables/hoses. Keep the cables/hoses away from oil or chemicals.
• Do not place any containers, vases or plants that contain liquid on or next to the 4-in-1 rework station
or mains cable.
If liquid enters the 4-in-1 rework station, it will destroy the 4-in-1 rework station, besides which there is a
highriskofafatalelectricshockorre.
• Ifliquiddoesenterthe4-in-1reworkstation,rstswitchoffthemainsvoltagetothesocketcontaining
the mains plug which the 4-in-1 rework station is connected to (switch off at the corresponding circuit
breaker or remove the safety fuse, and then switch off at the corresponding RCCB (ground fault circuit
interrupter), so that the mains plug is reliably disconnected from the mains voltage. You can then unplug
the power adapter from the mains socket.
Discontinue use immediately and take the product to a specialist repair shop, or dispose of it in an
environmentally friendly manner.
e) Operation
• Donotusethe4-in-1reworkstationinroomsoradverseambientconditionswhereammablegases,
vapours or dust are or may be present! This may cause an explosion!
• Do not fasten any items to the 4-in-1 rework station, and never cover the 4-in-1 rework station. This
constitutesarehazard!
• Do not move the 4-in-1 rework station using the mains cable or the hose.
• Donotusetheproductwhenyouarenotconcentrating.Neverworkundertheinuenceofalcoholor
medication.