English
7
Using the telephone
Call from the redial list
You can redial the last 5 numbers called.
2.5 Making an internal telephone call
2.6 Internal call transfer
Transfer an external call to another handset.
2.7 Make a 3-way conference call
The conference call feature allows one external call to be shared with two handsets.
During an external call:
2.8 Speaker volume during call
2.9 Microphone mute
It is possible to mute the microphone during a conversation.
2.10 Using the alphanumerical keypad
With your telephone, you can also enter alphanumeric characters. This is useful for entering a name
into the phonebook, giving a name to the handset, ...
1 Press the redial key to access the redial list.
2 Select the desired redial number.
3 Press the off-hook key to dial out the selected number.
4 Press the on-hook key to hang up or put the handset back on the base.
1 Press the INT key.
2 Enter the number of the internal handset (1 to 5). Press the *-key to call all
handsets.
3 Press the on-hook key to hang up or put the handset back on the base.
1 Press the INT key.
2 Enter the number of the internal handset (1 to 5), the external caller is put
on hold.
3 When the other handset picks up, press the on-hook key to hang up and
transfer the call.
If the internal correspondent does not pick-up, press the on-hook key again to
reconnect to the external caller on line.
4 Press the on-hook key to hang up or put the handset back on the base.
1 Press the INT key.
1 Enter the number of the internal handset (1 to 5), the external caller is put
on hold.
2 When the other handset picks up, press and hold the INT-key to establish
the conference call.
If the internal correspondent does not pick-up, press the on-hook key to
reconnect to the external caller on line.
1 During a conversation, press the up or down key to change the volume
accordingly.
1 Press the mute key. You can talk freely without being heard by the calling
party. “MUTE ON” is displayed.
2 Press the mute key again to return to normal mode.
To Next Page
Loading...
