24
12. SELECTING MODE
Selecting mode 2
To set the instrument to selecting mode 2, turn the power ON while pressing {V/%}.
*1) DT-302 only
*2) DT-302/305/305L/307/307L only
• Do not change the setting value (0) of unused items.
Selecting mode 2
Digit
No.
Items Contents Setting value = 0
Setting
value = 1
1
Press {0 SET} once/
twice
Select number of times {0 SET} is
pressed to set horizontal angle to 0.
Twice Once
2 Compass ON/OFF
Set the compass to ON or OFF
(Vertical angle scale).
OFF ON
3
RS-232 Output
*1)
Set data output function to ON or
OFF.
OFF ON
4 H Angle Memory
Horizontal angle set can be retained
after the power is turned off.
OFF ON
5
Tilt correction
ON/OFF
*2)
Set tilt correction to ON or OFF. OFF ON
6
7
Unused --- --- ---
0 0 0 0 0 0 0
Digit No.1Digit No.7
Selecting mode 2
{V/%} + Power on
To Next Page
Loading...
Need help?
General
