16
8. POWER ON/OFF
PROCEDURE Power ON
1. Press the power switch key on the operation panel.
Every segment turns on for about 1 second, and then the
horizontal angle is displayed.
Press {V/%}.
The vertical angle is displayed.
• Confirm the battery power remaining on the display.
Replace with charged battery or charge when battery level
is low.
"■ Remaining Battery Power"
PROCEDURE Power OFF
1. Press the power switch key on the operation panel.
CAUTION
• When using the laser-pointer function, be sure to turn OFF the output laser after measurement is completed.
Even if the power is turned off, the laser-pointer function is still operating and the laser beam continues to be
emitted.
V 11°50’00”
HR 342°03’00”
Remaining battery power
To Next Page
Loading...
Need help?
General
