Your local authorized dealer is:
On the Topcon Support website (www.topconpositioning.com/support), you
can download manuals, technical documentation, training material, and
various utility software to help you set up and use your Topcon product.
The website also offers registration resources, training, and technical
assistance.
Register for a free account at https://www.topconpositioning.com/support
today to download this material.
Technical Documentation and Utility Software
Restrictions on Use
The HiPer VR UHF radio modem has been designed to operate only at specic frequencies.
The exact frequency in use differs from one region and/or country to another. The user of a
radio modem must take care that the said device is not operated without the permission of
the local authorities on frequencies other than those specically reserved and intended for
use without a specic permit.
The HiPer VR UHF (406-470 MHz) is allowed to be used in the following countries, either
on license free channels or on channels where the operation requires a license. Additional
detailed information is available at the local frequency management authority.
Countries*: AT, BE, BG, CY, DK, FI, FR, DE, GR, IS, IE, IT, LU, MT, NL, NO, ES, SE, CH, GB,
AU, CA, CZ, EE, HU, LV, LT, PL, PT, RO, SI, SK, ZA and US.
* codes of the countries follow the ISO 3166-1-Alpha-2 standard
RF Exposure Warning
To comply with RF exposure requirements, maintain at least 37 cm
between the user and the GNSS receiver.
Battery Warning
Do not attempt to open the battery pack or replace it.
Do not disassemble the battery pack.
Do not charge in conditions different than specied.
Do not use other than the specied battery charger.
Do not short circuit.
Do not crush or modify.
Dispose of batteries according to your local regulations.
For more information contact Synergy Positioning Systems or
visit the Synergy Positioning Systems website at www.synergypositioning.co.nz
All branches: Phone 0800 867 266 Email: info@synergypositioning.co.nz