Need help?Do you have a question about the Topcon Net-G3A and is the answer not in the manual?
General| Type | GNSS Receiver |
|---|---|
| Ingress Protection | IP67 |
| Frequency Bands | L1, L2 |
| Positioning Accuracy (RTK) | 15 mm + 1 ppm (Vertical) |
| Positioning Accuracy (Static) | 5 mm + 0.5 ppm (Vertical) |
| Communication Interfaces | Ethernet, USB, Bluetooth |
| Operating Temperature | -30°C to +65°C |
| Power Supply | 10-28V DC |
| Data Recording | Internal memory |
Defines the terms and conditions for using the Topcon product and its software.
Explains the conventions used in the manual for clarity and consistency.
Explains the fundamental principles behind GNSS receivers and their operation.
Provides an overview of Global Navigation Satellite Systems (GPS, GLONASS, Galileo).
Describes the Net-G3A receiver's technology, channels, and basic functions.
Details the Minimum INTERface (MINTER) for receiver control and status.
Describes the front and back panel ports for data and power connectivity.
Lists and illustrates the essential cables and power supply included in the package.
Guidelines for selecting an appropriate site for installing the reference station.
Instructions for installing Topcon GPS+ software (PC-CDU, Topcon Link, FLoader).
Instructions and requirements for powering the Net-G3A receiver.
Guides on establishing connections between receiver and computer via different methods.
Steps to configure Ethernet connection settings using PC-CDU.
Steps for configuring the Net-G3A receiver for static reference station use.
Detailed configuration of MINTER settings for receiver operation.
Procedure for setting up the Net-G3A as a temporary reference station.
Procedure for starting and monitoring data collection.
Steps to download data files from the memory card to a computer.
Instructions for performing a hard reset on the receiver.
Steps to clear the receiver's Non-Volatile Random Access Memory (NVRAM).
Steps for downloading and loading new firmware onto the receiver.
Initial checks to perform before contacting support for troubleshooting.
Solutions for common issues related to receiver power.
Troubleshooting common issues with receiver connectivity and satellite lock.
Contact information and procedures for getting customer support.
Detailed measurement dimensions of the Net-G3A receiver.
General specifications including physical, environmental, and I/O details.
Detailed specifications for all connectors on the Net-G3A receiver.
General safety precautions and usage guidelines for TPS receivers.
Specific warnings regarding product handling, service, and care.
Information on the device's compliance with FCC rules.
To Next Page
