Receiver and File Maintenance
NET-G3A Operator’s Manual
4-14
Managing Receiver Options
The Option Authorization File enables certain functions, features, and
options in the receiver, such as the following:
• the type of signal (L1 or L1/L2) the receiver will process
• the amount of data the receiver will store in the memory
• the rate at which data will be transmitted or received
For a complete list of available options and details, consult with your
Topcon dealer.
Checking the Receiver’s OAF
The receiver’s OAF lists all enabled or disabled features. To
determine if a feature is turned on or which features are available,
check the receiver’s OAF using available Topcon receiver
management software. The following steps use PC-CDU to view
options.
1. Connect your receiver and computer. See “Connecting the
Receiver and a Computer” on page 2-15 for this procedure.
2. Click ToolsReceiver Options. The Options Manager dialog
box (Figure 4-13 on page 4-15) contains the following
information:
• Option name – a name/description of the option
• Current – the current status of the option
• Purchased – if the option is purchased or not
• Leased – if the option is leased or not
• Expiration date – the date the option will be disabled, if
applicable
Because options can be both purchased and leased, the “Current”
status of the option displays the currently effective value. Option
values can be one of the following:
• -1 or “-----” – the firmware version does not support this
option
• 0 – the receiver option is disabled
Net-G3A_OM_Book.book Page 14 Thursday, May 14, 2009 8:49 AM
To Next Page
Loading...
Need help?
General
