Downloading Data Files from a Removed Memory Card
P/N 7010-0935
4-7
9. Click Copy. If any file names appear in red in the USB Storage
box, then the Copy button will be unavailable (Figure 4-8).
Figure 4-8. Copying Data Files to a UMS device
Downloading Data Files from a
Removed Memory Card
After removing a memory card from the receiver, the data can be
downloaded using Topcon Link software. A CF card reader in or
connected to the computer is required to access the data on the card.
Before Topcon Link can read data on a Memory Card, the card must
be formatted for Topcon devices.
• The device icon for a formatted card will be red.
• The device icon for an unformatted card will be gray.
To format a memory card:
1. Insert the memory card into the card reader.
During the copying process, the REC LED will
blink yellow every second. Do not remove the UMS
device until the blinking stops.
Refer to the Topcon Link User’s Manual for a
complete description of working with data on a
memory card.
Net-G3A_OM_Book.book Page 7 Thursday, May 14, 2009 8:49 AM
To Next Page
Loading...
Need help?
General
