Receiver and File Maintenance
NET-G3A Operator’s Manual
4-12
Initializing File System
Initializing the file system of a connected receiver erases all of the
receiver’s data files. This process requires two confirmations before
beginning and may take several minutes depending on the receiver’s
memory size.
Figure 4-12. Initializing the File System
When the receiver’s memory is initialized, information on the file
system and physical memory displays.
• Refresh – reloads the information.
• Save to file – saves the files system and physical memory
information to a text file.
First confirmation to
initialize file system
Second confirmation to
initialize file system
Initialization
in progress
Initialization complete
Net-G3A_OM_Book.book Page 12 Thursday, May 14, 2009 8:49 AM
To Next Page
Loading...
