Specifications
NET-G3A Operator’s Manual
A-2
Net-G3A Dimensions
Figure A-1 shows the measurement dimensions for the Net-G3A
receiver, including the placement of the screw holes.
Figure A-1. Net-G3A Dimensions
Use these dimensions when drilling holes into a permanent mount,
using four #8-32 screws to attach the receiver.
Dimensions are in inches.
8-32 UNC
4X
Ø0.135
4.960
6.5
6.69311.0
1.244
FN
STAT LINK PWR 1
REC RESET PWR 2
3.75
A
Net-G3A_OM_Book.book Page 2 Thursday, May 14, 2009 8:49 AM
To Next Page
Loading...
