P/N 7010-0935
3-1
Net-G3A Configuration
and Setup
The Net-G3A is intended primarily for use as a permanent or semi-
permanent GNSS Reference Station to establish networks supporting
both real-time and post-processing applications. Observation data can
be streamed through any port to any device capable of receiving and
utilizing it, including TopNET Reference Station software. Data can
also be logged internally to removable CF cards for downloading to
support static or kinematic surveying, mapping, monitoring, and
positioning applications.
The Net-G3A is configurable for single to multiple scenarios,
including the following:
• permanent and semi-permanent Reference Station
• temporary campaign receiver
• RTK or DGPS rover (for monitoring a fixed location, system
monitoring, or mobile data collecting)
This chapter contains information on the basic configuration of the
Net-G3A for some of these applications. Further configuration
information is contained in the PC-CDU manual as well as the
TopNET software manuals.
Regardless of the intended application or configuration software, the
basic setup of the Net-G3A includes the following steps:
• “Configuring the Receiver” on page 3-2
• “MINTER Description and Configuration” on page 3-9
• “Receiver Setup as a Temporary Reference Station” on page 3-21
• “Static Surveying for Reference Stations” on page 3-26
Net-G3A_OM_Book.book Page 1 Thursday, May 14, 2009 8:49 AM
To Next Page
Loading...
Need help?
General
