Getting Acquainted
P/N 7010-0935
1-9
• Flexibility in software applications that control and monitor the
receiver’s behavior, including PC-CDU, TRU, and TopNET, as
well as user-written applications.
• Flexibility in the physical interface used to connect the receiver
with various external devices, including computers, network
devices, various sensors, frequency sources, etc.
MINTER
The MINTER is the receiver’s minimum interface used to display and
control data input and output (Figure 1-2 on page 1-10).
The STAT LED displays the status of tracked satellites.
• Red blink – receiver is on, but no satellites are being tracked.
• Green blink – receiver is on and tracking satellites; one blink per
tracked GPS satellite.
• Orange blink – receiver is on and tracking satellites; one blink per
tracked GLONASS satellite.
The LINK LED displays Ethernet connection status.
• Solid Green – A valid Ethernet connection with an active device
on the network is established.
• Off – No Ethernet connection is established.
Net-G3A_OM_Book.book Page 9 Thursday, May 14, 2009 8:49 AM
To Next Page
Loading...
Need help?
General
