Need help?Do you have a question about the Topcon Net-G5 and is the answer not in the manual?
General| L-band | Yes |
|---|---|
| IP Rating | IP67 |
| Type | GNSS Receiver |
| GPS | Yes |
| GLONASS | Yes |
| Galileo | Yes |
| BeiDou | Yes |
| QZSS | L1 C/A, L1 SAIF, L2C, L5 |
| SBAS | L1 C/A |
| Data Storage | 8 GB internal memory |
| Communication | Bluetooth, Wi-Fi |
| Power Supply | external power |
| Storage Temperature | -30°C to +70°C |
Guides on powering the receiver on and off using the power button.
Outlines primary methods for configuring receiver settings and options.
Details how to access and use the receiver's built-in web interface.
Provides step-by-step instructions for updating the receiver's firmware.
Explains OAFs for enabling specific receiver features and how to load them.
Describes how to perform a factory reset and clear the receiver's NVRAM.
Covers the initial physical setup and connection of the GNSS receiver.
Guides on starting, stopping, and managing GNSS data collection.
Details how to configure logging rates and data message types.
Provides instructions on how to log raw GNSS data to the receiver's memory.
Lists essential checks before contacting support for problems.
Addresses common issues related to the receiver not powering up.
Solves issues related to establishing a connection with the receiver.
Covers general safety guidelines and RF exposure compliance.
Highlights warnings related to tampering and charging the receiver.
Advises on proper usage, care, and servicing of the product.
To Next Page
