Need help?Do you have a question about the Topcon HiPer V and is the answer not in the manual?
General| Type | GNSS Receiver |
|---|---|
| Channels | 220 |
| GPS | Yes |
| GLONASS | Yes |
| Galileo | Yes |
| BeiDou | Yes |
| QZSS | Yes |
| SBAS | Yes |
| IRNSS | No |
| RTK Horizontal Accuracy | 8 mm + 1 ppm |
| RTK Vertical Accuracy | 15 mm + 1 ppm |
| Internal Memory | 8 GB |
| Operating Time | Up to 12 hours |
| Communication | Bluetooth, Serial |
| Power Supply | Li-ion Battery |
| Static Horizontal Accuracy | 3mm + 0.5ppm |
| Static Vertical Accuracy | 5mm + 0.5ppm |
Lists key features of the HiPer V GNSS receiver.
Explains how to use Topcon software with the HiPer V receiver.
Describes the physical layout and components of the HiPer V receiver.
Explains the function and indicators of the receiver's LED display.
Details the operations controlled by the receiver's power button.
Describes LEDs indicating position type and satellite tracking.
Instructions for powering the receiver on and off.
Details about the receiver's detachable batteries.
Steps for charging the HiPer V receiver batteries.
Steps to upload new firmware to the receiver.
How to restore receiver parameters to factory default settings.
Step-by-step guide to set up the receiver as a base station.
Step-by-step guide to set up the receiver as a rover.
How to configure data logging rates and message types.
Steps to start, stop, and manage data recording.
Initial checks before contacting support for receiver issues.
Solutions for issues related to receiver power and battery.
Troubleshooting for connection, satellite lock, and solution issues.
Technical specifications for the HiPer V's GPS board.
Safety precautions for handling and using the battery packs.
To Next Page
