Topcon HiPer V - Loading New Firmware

Configuring the Receiver
LoadingNewFirmware
37
P/N:1001608‐01
Loading New Firmware
Receiverboardfirmwareisreleasedasacompressedfilethatyoudownloadanddecompress.Thisfilecontainsthefollowing
files:
• Mainboardfirmware
• GNSSfirmware
• Radiofirmware
TouploadGNSSandradiofirmwarefilestothereceiver:
1. Connectthereceivertoacomputerusingtheserialcable.
2. ToconnecttothereceiverinTRU:
a. ClickDeviceApplicationModeReceiverManaging.
b. ClickDeviceConnect.
c. IntheConnectionParameterswindow(Figure 16),selectSerialPortandtheportname,andthenclick
Connect.